16:48:46 Airborne.
16:53:21 Event marker, cloudscope. Cloudscope shutter speed to 1/10,000 sec because of bright sky. Note that the 1/1000 sec shutter speed seems identical with the 1/60 sec shutter speed, indicating a malfunction.
17:00:01 Cloudscope temperature -3.2 C.
17:03:54 Replicator pump on, deice on.
17:10:08 Replicator turned on, PMS 2DC seeing ice.
17:15:00 Replicator to filmspeed 2 from filmspeed 1.
17:16:40 Replicator to filmspeed 1, thinning cloud.
17:17:05 Event marker, replicator.
17:18:35 Replicator turned off. The hose popped off of the pump, making a loud noise. Gave me a heart attack.
17:29:00 Fixed replicator pump hose, replicator back on to speed 1.
17:31:00 Aircraft turning.
17:35:05 Simultaneous replicator and cloudscope event markers.
17:42:00 Replicator on, event marker perhaps sticking. (Missed note for replicator off.)
18:00:00 Replicator on, speed 2.
18:01:05 Event marker replicator.
18:03:00 Replicator off, film stuck.
18:12:00 Event marker cloudscope, nice crystals on the screen.
18:18:00 (roughly), replicator unstuck, after using tip adjustment to move film back and forth enough to loosen it.
18:23:02 Replicator unstuck.
18:24:26 Replicator on filmspeed 1.
18:29:15 Replicator stuck again.
18:30:00 At this point, can't figure out how the replicator pump is working, and what the differential pressure gauge is reading. This piled on top of the malfunctioning replicator gives me a big headache, and work to do later.
18:57:00 Up high (-50's C) and cloudscope temperature gauge not functioning. It stays on error setting. This is only an indicating temperature, and is not recorded, but it would be nice to have it working.
19:00:00 Cloudscope seems to have more noise at higher altitude, perhaps indicating that the heater on the camera is not strong enough.
19:05:00 Spiralling around CART site.
19:18:00 Air brakes on aircraft, preparing for landing.
{return}